Arduino sketch functions

These calls live in the Box IO library. You set them in the sketch. Timers, the send cap, and the poll interval are the ones people change most often. Email, SMS, and the ping watchdog have their own pages.

Calls you can use

Start the library

1. Copy arduino/BoxIO to Documents/Arduino/libraries/BoxIO and restart the IDE.
2. Wi-Fi sketches include BoxIOEsp32.h. An Ethernet board includes BoxIOEthernet.h or passes an EthernetClient to BoxIO.begin.
3. Put the device key in BOXIO_AUTH. The host is the Box IO machine. The port is 5923.
4. Call BoxIO.config(key, host, port) or BoxIO.setAuth and BoxIO.setServer only when you are not passing those arguments to begin.
5. Leave BoxIO.run() in loop(). Timers do not fire on their own.

Timers

BoxIO.setTimer(1000, sendTemp) calls sendTemp every 1000 milliseconds. The first call is one interval after you register it. Each setTimer adds another timer. The function takes no arguments and returns nothing.

The return value is the id for BoxIO.deleteTimer. It is -1 when the interval is 0 or the table is full. An Uno (ATmega328P or ATmega168) holds 6 timers. Other boards hold 16. To change that, define BOXIO_MAX_TIMERS before the include.

Timers still run when the server is unreachable. A virtualWrite inside the timer follows the send cap below.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

int tempTimer = -1;

void sendTemp() {
  BoxIO.virtualWrite(V1, analogRead(34));
}

void sendStatus() {
  BoxIO.virtualWrite(V2, "ok");
}

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);
  tempTimer = BoxIO.setTimer(1000, sendTemp);
  BoxIO.setTimer(10000, sendStatus);
}

void loop() {
  BoxIO.run();
  // BoxIO.deleteTimer(tempTimer);
}

How often virtualWrite can send

Each virtualWrite opens an HTTP connection. The library allows 30 of those per second. Extra writes are kept: the latest value for each pin goes out on a later BoxIO.run(). setProperty, email, and SMS are not counted.

1. BoxIO.setMaxSendsPerSecond(10) allows 10 virtualWrite messages per second.
2. BoxIO.setMaxSendsPerSecond(0) removes the cap.
3. BoxIO.setMaxSendsPerMinute(30) switches the cap to 30 per minute. Call setMaxSendsPerSecond again to switch back to a per-second cap.

The waiting list holds 4 pins on an Uno and 12 on other boards. A newer write to the same pin replaces the older one. A value that does not fit the waiting slot is not queued: 40 characters on an Uno, 96 on other boards. Define BOXIO_MAX_PENDING before the include if you need more pins waiting.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);
BoxIO.setMaxSendsPerMinute(30);
}

void loop() {
  BoxIO.run();

}

How often the board asks for commands

BoxIO.setPollInterval(400) is the default. run() asks the server for button, slider, and input commands that often. A smaller number reacts sooner and uses more radio time. The value is a uint16_t, so the largest interval is 65535 milliseconds. The board also sends a short ping about every 10 seconds. That interval is fixed.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);
BoxIO.setPollInterval(250);
}

void loop() {
  BoxIO.run();

}

Commands from the dashboard

BOX_WRITE is a function the library calls when that virtual pin changes. It has to sit at global scope, and the pin has to be a name the compiler can paste into a function: V0 through V31, or the number 0 through 31. A variable does not work in the macro. Pins above 31 can still virtualWrite, but the dashboard cannot call a handler on them.

param.asInt(), asLong(), asFloat(), asBool(), and asStr() read the text the widget sent. asBool() is true when the integer value is not 0.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);
pinMode(2, OUTPUT);
}

void loop() {
  BoxIO.run();

}

BOX_WRITE(V0) {
  digitalWrite(2, param.asInt() ? HIGH : LOW);
}

Read a pin back from the server

virtualRead asks the server for the last value stored on that pin and copies it into a buffer you provide. Use it when the sketch needs a value that was set from the dashboard and you are not using BOX_WRITE.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);

}

void loop() {
  BoxIO.run();
char value[32];
  if (BoxIO.virtualRead(V3, value, sizeof(value))) {
    Serial.println(value);
  }
}

Change a widget from the sketch

Every setProperty value is a string, including numbers. A non-empty value replaces the saved dashboard property until you edit that same property on the dashboard. Property names for each widget are on that widget’s page. Circle meter start and end use degrees: 0 is straight up, and degrees increase clockwise. 225 to 135 is the lower-left to lower-right gauge.

#define BOXIO_AUTH "bx_paste_your_device_key_here"
#define WIFI_SSID  "your-ssid"
#define WIFI_PASS  "your-password"
#define BOXIO_HOST "boxio.krmsproducts.net"
#define BOXIO_PORT 5923

#include <BoxIOEsp32.h>

void setup() {
  BoxIO.begin(BOXIO_AUTH, WIFI_SSID, WIFI_PASS, BOXIO_HOST, BOXIO_PORT);
BoxIO.setProperty(V2, "label", "Pump");
  BoxIO.setProperty(V2, "min", "0");
  BoxIO.setProperty(V2, "max", "200");
  BoxIO.setProperty(V2, "startDeg", "225");
  BoxIO.setProperty(V2, "endDeg", "135");
}

void loop() {
  BoxIO.run();

}

Email, SMS, and the ping watchdog

• Email: BoxIO.email(to, subject, body) after SMTP is saved. The address and subject are cut at 80 encoded characters, and the body at 120. On a classic AVR the whole request also has to fit in 192 characters.
• SMS: BoxIO.sms(to, body) after Twilio is saved. The number is cut at 40 encoded characters and the body at 140.
• Ping watchdog: BoxIO.setPingWatchdog(host, intervalSec, misses, gpio, direction, transitionSec). BOX_HIGH_TO_LOW drives the GPIO high, then low. BOX_LOW_TO_HIGH does the opposite. The check is TCP, not ICMP.